We know you will love your new purchase and will want to look after it, below are a few key points to help get the best out of your new furniture.
Our suar wood tables are delivered treated with teak oiled or NC (Nitro Cellulose) with a fine sanded finish to allow you to select the finish you prefer. We recommend regular treatment with an oil of your choice, previous customers have used Teak Oil, among others. The intervals between treatments will vary depending on the conditions in your home:
sunlight, temperature variation, humidity etc., as well as how often it is used. We suggest a treatment should be applied at least every three months following the product manufacturer’s instructions, always test a wood treatment on an inconspicuous area first to make sure you are happy with the finish. We do not recommend using varnish or lacquer products on Suar wood.
One of our customers shared this feedback from their experience of using Teak
Oil to treat their Sound tables and chairs set:
“We are really pleased with the tables and chairs we purchased a few months ago, for your advice via email, we used teak oiled to make it good again, and after I tried the results were amazing, my table became beautiful and exotic”
Always clean up any spills quickly to avoid staining. As all our flare products are made of solid wood, stubborn stains can be sanded out, to achieve a fine sanded finish use min 180-200 grit sandpaper.
Please be advised that, due to the nature of the wood, we do not advise placing any furniture items on carpet or susceptible flooring materials. If you wish to do so, please place a protective layer underneath each leg to prevent staining.
Our Teak Root Furniture is delivered with a waxed finish and will not require further treatment. We recommend regular dusting with a clean, damp cloth. Beeswax polish or coconut oil can be applied if you prefer a more polished look
to the wood. Please be advised that, due to the nature of the wood, we do not advise placing any furniture items on carpet or susceptible flooring materials. If you wish to do so, please place a protective layer underneath each leg to prevent staining.
You can wash down the wood, but always avoid alkaline soaps as these can be damaging to the surface. Ensure you wipe off any residues after cleaning and dry the wood thoroughly.
Always use a coasters or matt to protect the glass table tops from damage.
Always protect a glass table top from direct heat, never place anything very hot directly onto a glass table top.
Reclaimed Teak / Pine
Our Reclaimed Teak furniture is delivered un-treated with a rustic or painted finish revealing the unique character and grain of the wood used in the manufacture. These pieces do not require any wood treatment, but if you wish to protect against marks / stains we would suggest using a flat matt varnish to protect the wood with a minimal effect on the finish. Always test a product on an inconspicuous area first to ensure you are happy with the finish and follow the product manufacturer’s instructions.
Teak Root Chopping Boards, Bowls & Vases
We recommend regular treatment of all of our teak root accessories with oil to preserve the finish and ‘feed’ the wood. We use coconut oil in our showroom, which sinks into the wood leaving a subtle sheen while bringing out the character of the grain. For chopping boards, you can also use mineral oil which is specifically designed for use on chopping boards. To clean down chopping boards, wipe with a damp cloth, do not immerse in water, and avoid alkaline soaps as these will damage the wood.